Iso 4762 Torque Standards

Posted : admin | On 24-05-2021

Iso 4762 Pdf
Iso 4762 Torque Standards Pdf
Iso 4762 Standard
Iso 4762 Material

DIN 912 / ISO 4762 Socket Head Cap Screws. 8.8 Grade Bare Steel/Zinc Plated. Torque Information. Torque Information. Adjustment of Torque for Tightening Method and Friction Coefficient. Two major points have to be accounted for when installing a fastener. Inaccuracy of torque wrench tightening method can range anywhere from ±17 to ±23%. 12 rows ISO 4762 Hexagon Socket Head Cap Screws Dimensional Standards and Technical.

Torque Information

Adjustment of Torque for Tightening Method and Friction Coefficient

Two major points have to be accounted for when installing a fastener.

Iso 4762 Pdf

Iso 4762 Torque Standards Pdf

1. Inaccuracy of torque wrench tightening method can range anywhere from ±17 to ±23%
2. The friction coefficient changes when using lubrication on the thread.

1. Inaccuracy of tightening method

A torque wrench has a “scatter” (tolerance) of ±17% to ±23%. We must account for this in order not to over-tighten the fastener.

Example:

A M30-12.9 fastener has a maximum tightening torque of 2,280 Nm, based on a friction coefficient of 0.125 (zinc plated)
Maximum torque: 2,280Nm (= 123%) (or 117%)
Mean torque if scatter is +23% = 2,280 / 1.23 = 1,854 Nm
Minimum torque if scatter is +23% = 1,854 x 0.77 = 1,428 Nm

Torque should be set to 1,854 Nm (mean torque) on the torque wrench

The accuracy of the tightening method needs to be accounted for, in order to not over-tighten the fastener.

2. Friction coefficient

The surface condition of a fastener may change the torque that can be applied and needs to be accounted for.

Surface Condition		Lubrication Condition
Friction coefficients for standard finish fasteners
Screw	Nut	Oiled	MoS2-Paste
– no treatment – phosphate	– no treatment	0.12-0.18	0.05-0.10
– electroplated appx. 8 μm	– electroplated appx. 5 μm	0.12-0.18
– dacromet-coated 6-8 μm	– dacromet-coated 6-8 μm	0.10-0.14

Example:

A M30-12.9 fastener using MoS2 paste.

A M30-12.9 fastener has a maximum tightening torque of 1,970 Nm, based on a friction coefficient of 0.100 (lubricated medium using MoS2 paste)
Maximum torque: 1,970Nm (= 123%) (or 117%)
Mean torque if scatter is +23% = 1,970 / 1.23 = 1,602 Nm
Minimum torque if scatter is +23% = 1,602 x 0.77 = 1,234 Nm

Torque should be set to 1,602 Nm (mean torque) on the torque wrench

The accuracy of the tightening method, as well as the change in friction, needs to be accounted for in order not to over-tighten the fastener.

General Torque Figures

A torque value will be influenced by the fastening methods and tools used. The only way to determine an exact torque value is by actual application. The following figures are general guidelines only.

Figures in ft. lbs.

Thread Diameter	Property Class
Thread Diameter	8.8	10.9	12.9
M3	0.80	1.1	1.3
M4	1.8	2.6	3.1
M5	3.6	5.1	6.2
M6	7	10	12
M8	17	25	29
M10	33	48	58
M12	60	85	102
M14	97	137	165
M16	150	208	250
M18	201	287	342
M20	282	398	479
M22	390	552	664
M24	499	750	843
M27	746	1051	1266
M30	982	1383	1657
M33	1331	1875	2250
M36	1717	2407	2895
M39	2220	3120	3750
M42	2737	3840	4638
M45	3390	4762	5722
M48	4095	5775	6825
M52	5250	7387	9000
M56	6547	9225	11280
M60	8175	11475	13800
M64	9900	13950	17175
M68	12000	16950	20100
M72	14250	20100	24000
M76	16800	23625	28350
M80	19725	27600	33375
M85	24000	33225	40125
M90	28350	38925	47700
M95	33450	46875	56250
M100	39000	54750	66000

Torque – Metric Fasteners

Diameter	Recommended Seating Torque (NM)												Proof Torque min. (NM)
	ISO 4762DIN 912		DIN 7984	ISO 10642DIN 7991		ISO 7380		ISO 7379	ISO 4014/ 4017DIN 931 / DIN 933		ISO 4162		ISO4026 / 4027 4028 / 4029
	Socket CapScrews		Low HeadSocket Cap Screws	Flat HeadCountersunk Socket Cap Screws		Button HeadSocket Cap Screws		SocketShoulder Screws	Hexagon HeadCap Screws		Hexagon FlangeScrews		Socket SetScrews
	10.9	12.9	10.9	10.9	12.9	10.9	12.9	12.9	10.9	12.9	10.9	12.9	45H
M1.6	0.25	0.30
M2	0.50	0.63
M2.5	1.03	1.27
M3	1.83	2.20	1.15	1.15	1.35	1.15	1.35	0.90
M4	4.27	4.83	2.70	2.70	3.10	2.70	3.10	2.50
M5	8.64	10.0	5.40	5.40	6.10	5.40	6.10	8.64	10.0	8.64	10.0	5.00
M6	14.7	16.8	9.15	9.15	10.5	9.15	10.5	5.6	14.7	16.8	14.7	16.8	8.50
M6.5	5.6
M8	35.6	41.0	22.0	22.0	26.0	22.0	26.0	9.6	35.6	41.0	35.6	41.0	20.0
M10	70.6	81.0	44.0	44.0	52.0	44.0	52.0	25	70.6	81.0	70.6	81.0	40.0
M12	123	142	77.0	77.0	90.0	77.0	90.0	51	123	142	123	142	65.0
M13	51
M14	195	226	122	122	143 australianpharmall.com	195	226	195	226	65.0
M16	305	350	190	190	225	190	225	92	305	350	305	350	160
M18	420	485	262	420	485	310
M20	596	685	371	370	440	245	596	685	310
M22	811	930	811	930
M24	1031	1180	1031	1180
M25	485
M27	1508	1730	1508	1730
M30	2048	2380	2048	2380
M33	2787	3262
M36	3580	4190
M39	4633	5420

Torque – Imperial Fasteners

Iso 4762 Standard

Diameter	Recommended Seating Torque (in-lb)							Proof Torque min. (in-lb)
	ASME B18.3					ASME B18.2.1	IFI-111	ASME B18.3
	Socket CapScrews	Low HeadSocket Cap Screws	Flat HeadCountersunk Socket Cap Screws	Button HeadSocket Cap Screws	Socket Shoulder Screws	Hexagon HeadCap Screws SAE J429 Grade 8	Hexagon FlangeScrews SAE J429 Grade 8	Socket SetScrews
#0	2.26	1.42	1.42	1.1
#1	4.01	2.52	2.52	2.1
#2	6.65	4.18	4.18	2.1
#3	10.1	6.33	6.33	6.0
#4	14.1	8.88	8.88	8.88	6.0
#5	20.8	13.1	13.1	13.1	11
#6	26.2	16.5	16.5	16.5	11
#8	48.0	30.1	30.1	30.1	23
#10	69.5	43.7	43.7	43.7	40
1/4	166	104	104	104	35	134	134	94
5/16	342	215	215	215	90	277	277	183
3/8	608	382	382	382	200	491	491	317
7/16	973	611	611	785	785	502
1/2	1484	931	931	931	363	1202	1202	750
9/16	1732	1732
5/8	2792	1722	1722	1722	922	2386	2386	1460
3/4	4952	3054	1864	4225	4225	2520
7/8	7991	4928	6823	5750
1	11979	7388	3443	10226	8000
1-1/8	16968	10464	14485
1-1/4	23944	14766	5637	20442
1-3/8	31394	19360	26806
1-1/2	41611	25692	12002	35573